DOBINSONS FRONT UPPER CONTROL ARM KIT (UCA'S) FOR TOYOTA FJ CRUISER, 4RUNNER 2003 TO 2019 AND LEXUS GX470, GX460 (UCA59-002K)
- Complete kit for both left and right hand side, includes new ball joints (not assembled), OE style rubber frame bushings (installed), and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2") wall thickness, and powder coated black
- Works for any lift height of 1.5" or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5" or more, due to the built-in 3 degrees of caster. This will fit 4th Gen 4Runners 2003-2009, 5th Gen 4Runners 2010-2019, Lexus GX470 2003-2009 and Lexus GX460 2010 to 2019 and all generations of Toyota FJ Cruiser (FJC). NOTE: The ball joints are not installed, and must be installed by a professional using a heavy duty press. A hand press will not be strong enough. Dobinsons offers this service for an additional labor charge prior to shipping. These will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.
To order call RSG Offroad 720-519-3300